-
-
R32S Anchor Tool Self Drilling Anchor Bolt Threraded Bar Anchor Rod
Self-Drilling Anchor Tools: The self-drilling hollow bar anchor system consists of a hollow threaded bar with an attached drill bit that can perform drilling, anchoring and grouting in a single operation. The hollow bar allows air and water to freely pass through the bar during drilling to remove debris and then allow grout to be injected immediately after drilling is completed. Grout fills the hollow bar and completely covers the entire bolt. Couplings can be used to join hollow bars and extend the bolt length while nuts and plates are used to provide the required tension.
Self-drilling hollow bar anchor system is the most common used system for rock mass stabilization, especially in tunneling, underground mining and ground engineering industry. It is mainly used for the supporting engineering in the loose and broken rock stratal with difficult to drilling hole. It provides the optimal solution for soil nailing, lock bolting, micro-piling.
Self-drilling hollow bar anchor system fulfills current and increasing demands of the tunneling, mining industry and ground engineering for safer and faster production. The system provides advantages for all areas of its applications, where boreholes would require the time consuming drilling with casing systems in unconsolidated or cohesive soil.
-
R38L 1000mm to 8000mm Anchor Tool Self Drilling Anchor Bolt Threraded Bar Anchor Rods
Anchor bolt
Anchor bolt means a rod that transfers the structures or geotechnical load to a stable rock
formations, it consists of rod, drill bit, coupling, plate, grouting stopper and nut. It has been
widely used in tunnling, mining, slope stabilization, tunneldiseases treatment and roof supporting
of undergroundworks. It is for loose ground(clay, sand friable etc.) Hollow anchor rod is made of
seamless tube with high strength.
Features of hollow grounting anchor bolt
• Particularly suitable for difficult ground conditions.
• A high rate of installation since drilling, placing and grouting can be performed in one single operation.
• Self drilling system eliminates the requirement for a cased borehole.
• Installation with simultaneous drilling and grouting possible.
• Easy installation in all directions, also upwards.
• Suitable for working in limited space, height and in areas of difficult access.
• Simple post grouting system. • Hot-dipped galvanizing for corrosion protection
Applications in Tunneling & Ground Engineering
• Radial bolting
• Slope stabilization
• Forepoling
• Micro injection pile
• Face stabilization
• Temporary support anchor
• Portal preparation
• Soil nailing
Self-Drilling Anchor Bolt Description
R25N R32N R32S R38N R51L R51N T76N Outside Diameter (mm) 25 32 32 38 51 51 76 Internal Diameter (mm) 14 19 16 19 36 33 52 Ultimate Load Capacity (kN) 200 280 360 500 550 800 1600 Yield Load Capacity (kN) 150 230 280 400 450 630 1200 Tensile Strength, Rm (N/mm2) 800 800 800 800
800 800 800 Yield Strength, Rp0.2 (N/mm2) 650 650 650 650 650 650 650 Weight (Kg/m) 2.3 3.2 3.6 5.5 6.5 8.0 16.0 Steel Grade EN10083-1 (Alloy Structure Steel) Compared to carbon steel, alloy structure steel has high anti-corrosion capacity and high mechanical. -
Hollow grouted IBO self drilling tunnel rock bolt mining anchor bolt bit coupling
Introduction Of Hollow Drilling Mining Rock Grouting Anchor Bolt
1, Hollow Drilling Mining Rock Grouting Anchor Bolt consists of hollow core with continuous hot-rolled outside thread
2, Hollow Drilling Mining Rock Grouting Anchor Bolt can application as injection anchor without casing, especially for non-stable boreholes
3, self-drilling installation, utilization of the anchor bar as drill rod with a single-use drill bit
4, easy extension of the anchor bars by anchor coupler
5, grouting or development of the grout body either simultaneously with drilling using a rotary injection adapter or afterwards
6, assembly of the anchor head with the anchor plate and the nut, stressing and lockingParameter of Hollow Drilling Mining Rock Grouting Anchor Bolt
Bar
R32L
R32N/21
R32N/18.5
R32S
R32SS
Outside Diameter (mm)
32
Internal Diameter (mm)
22
21
18.5
17
15
Cross Sectional Area (mm2)
356
363
433
440
522
Ultimate Load (kN)
260
280
280
360
405
Yield Load (kN)
200
230
230
280
300
Weight (kg/m)
2.8
2.85
3.4
3.45
4.1
Thread Type
ISO10208
Type of Steel
EN10083-1
Thread (Left / Right hand)
Left or Right
Length (m)
(1) x 2, x3, x4, x5, x6, x7, x8, x9
Optional of Anti-corrosion
Hot-dipped Galvanization: ISO 1461 Epoxy Coating
Bending properties up to standard ISO 1519
Impact properties up to standard ASTMD 2794 Adhesion up to standared ISO 2409:2007
-
-
blast furance tap hole drill rod drill bar drill bit
A drill rod, for blast furnace taphole drilling consists of a steel tube, with a drill tip welded to one end, the novelty being that the drill tip consists of two or more steel profile sections uniformly distributed about the steel tube periphery, the sections being fixed to the tube by weld seams and projecting beyond the tube end by a distance in the direction of the longitudinal axis of the tube.
A tool for blast-furnace tap-hole drilling involves body with a cutting component, enlarging bit, drill rod with cutting structure, which longitudinally is disposed inside the hollow body with a cutting component, and device for control of drilling rod length, placed on a body above the cutting component.
-
opening machine adaptor
blast furnace tap hole opening machine adaptor
-
Threaded Drill rods with threaded the whole steel drill bits
1) Drill rod together with the whole steel drill bit by welding connecting
This tools are simple produced and have within our product range the most competitive price.It can be used for drilling of short and not difficult to drill tapping holes with soft tap hole clay and no inclusion of slag or iron.2)Threaded Drill rods with threaded the whole steel drill bits
The drill bit makes a clean hole with a constant diameter from beginning to end. The bit is made from wear resistant cast steel and interchangeable with different drill rods. R32-R32 drill rod:length 3000mm-6000mmT38 thread, Cross bits 64mm-165mm ,
T38-T38 DRILL ROD 2000mm-6000mm
-
full threaded steel self drilling rock bolt / hollow anchor bar / anchor rods
full threaded steel self drilling rock bolt / hollow anchor bar / anchor rods
Advantages and Characteristics as below:
5. Continuous threads ensure the bars can be cut and coupled at any point, or extended.
6. Different anchor bits are available for different ground conditions.
-
T38 T45 T51 600mm shank adapter drill pipe drilling rods rock drill rod for HL650,HL700,HL700T,HL710,HL800
TypeThreadLength(mm)Dia.(mm)Weight(kg)HL300R32400322.6L400,L410,L500,L510,L550R32245452.6HLR438L,HLR438TT38400383.3HL500-45/510-45R32550455.4HL500-45/510-45T38550455.6HL500-45/510-45T45550455.9HLX5 HLX5TR32500455.1HLX5 HLX5TT38500455.3HLX5 HLX5TR38500455.3HLX5 HLX5TT45500455.5HL600,HL600SR32600455.3HL600,HL600SR38600456.1HL600,HL600ST38600456.1HL600,HL600ST45600456.3HL650,HL700,HL700T,HL710,HL800T38600528HL650,HL700,HL700T,HL710,HL800T45600528.5HL650,HL700,HL700T,HL710,HL800T51600529.36HL1000,HL1000ST456705210HL1000,HL1000ST516705210.3 -
R25 R32 R38 T38 T45 T51 Rock Drill Rod for Mining Machinery
roduct Name: rock tools jack hammer drilling rod extension rod Description: rock tools jack hammer drilling rod extension rod Thread drill rod Made with best quality carbon steel bar,through heat treatment like Atlas.
Material: carbon steel bar MOQ: No MOQ required for testing and trial order Body Type Round shape and hexagonal type
Thread type R25,R28,R32,R38,T38,T45,T51 Diameter Hex25,Hex28,Rd32,Rd38,Rd45,Rd51 Type Thread extention Rod and MF rod Length 600mm-6400mm
-
blast furnace tap hole drill rod drill bar drill pipe drill bit
blast furnace tap hole drill rod drill bar drill pipe drill bit,manufactured according to customer drawings.