-
-
-
11 Inch Disc Cutter Supplier – Hard Rock Disc Cutters – LYNE
Disc Cutter is hard rock tool. It is to crush the rocks by the extruding force, shearing force and tensile force formed by cutter rolling. ( The rock strength, rock integrality, tunneling distance, sand content determine the selection, quantity, arrangement of Disc cutters on the Cutter Head). Disc Cutter is generally used in the loose strata which contain much gravels with the diameter bigger than 400mm, and the mixed ground with clay, sandy and up to 30MPa strength rocks. Shield cutters are... -
China Wholesale T45 Drill Rod Supplier – Bench and long-hole drilling ST68 (2 3/4″) – LYNE
Bench and long-hole drilling ST68 (2 3/4″) R25 (1”) R28 (1 1/8”) R32 (1 1/4”) R/T38 (1 1/2”) T45 (1 3/4”) T51 (2”) T60 (2 3/8”) Drill bit R/T38 Extension rod T38 – Hex. 32 mm – T38 Extension rod T38 – Round 38 mm – T38 (Speedrod) Extension rod R38 – Round 38 mm – R38 Extension rod T38 – Round 38 mm – T38 Extenstion rod T38 – Round 38 mm – T38 (with double thread) Guide rod T38 – Round 4... -
-
-
China Wholesale 18 Inch Disc Cutter Supplier – Hard Rock Disc Cutters – LYNE
Disc Cutter is hard rock tool. It is to crush the rocks by the extruding force, shearing force and tensile force formed by cutter rolling. ( The rock strength, rock integrality, tunneling distance, sand content determine the selection, quantity, arrangement of Disc cutters on the Cutter Head). Disc Cutter is generally used in the loose strata which contain much gravels with the diameter bigger than 400mm, and the mixed ground with clay, sandy and up to 30MPa strength rocks. Shield cutters are... -
Rock Drill Equipment Supplier – R28 (1 1/8 “) bit thread – LYNE
R28 (1 1/8 “) bit threa Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 38 1 1/2” 2×7 5×9 30º 1 1 0.60 1431-38R28-27/59-45-41 38 1 1/2” 2×7 5×9 35º 1 1 0.60 1431-38R28-27/59-45-41 41 1 5/8” 2×8 5×9 35º 1 1 0.70 1431-41R28-28/59-45-41 43 1 11/16” 2×8 5×10 30º 1 ... -
China Wholesale Trencher Teeth Manufacturers – Bench and long-hole drilling T38 (1 1/2 “) – LYNE
Bench and long-hole drilling T38 (1 1/2 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 64 2 1/2” 3×11 6×12 30º 3 - 1.6 1432-64T38-311/612-45-41 64 2 1/2” 3×11 6×12 35º 3 - 1.6 1432-64T38-311/612-45-51 64 2 1/2” 5×9 8×10 35º 4 - 1.7 1432-64T38-59/810-45-51 70 2 3/4” 5×... -
-
Drill Shank Rock Drill Tools Factory – Shank adapters – LYNE
Thread Length (mm) Flushing Hole(mm) Weight approx kg Part No. Atlas Copco BBC 43, 44, 45 and 100 R32 380 10 2.0 4BBC43-32R32-0380-23 Atlas Copco BBC 51, 52, 54 and 120 R32 380 10 2.6 4BBC51-38R32-0380-23 T38 390 10 3.0 4BBC51-38T38-0390-23 Atlas Copco BBE 57 T38 537 14 5.4 4BBE57-44T38-0537-23 Atlas Copco COP 125, 130 and 131 T38 380 14 13.9 4125-38T38-0380-23 Atlas Copco COP 1032 R32 ... -
China Wholesale Cutting Teeth Suppliers – Coal mining teeth-U76 – LYNE
Protection Cutter Bits are the auxiliary cutters. They are classified into Protective Cutter Bit for Cutter Head, Protection Cutter Bit for Cutter Holder, Protection Cutter Bit for foam filling hole , Protective Cutter Bit for injection hole and Diversion Cutter, which base on their different roles. Copy Cutter Bit is installed on the gauge area of Cutter Head. While Shield Machine tunneling along curve or adjusting the direction, Copy Cutter Bit tries to minimize overbreak to leave the suffi...
Hello, come to consult our products !
