China Wholesale 2 Rings Disc Cutter Suppliers – Foundation Auger Drilling Teeth B47k19h – LYNE

Product Detail

Product Tags

Feedback (2)

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Carbide Bullet Teeth, Drill Settings For Metal, Top Hammer Drill Bit, We never stop improving our technique and quality to keep up with the development trend of this industry and meet your satisfaction well. If you are interested in our products, please contact us freely.

China Wholesale 2 Rings Disc Cutter Suppliers – Foundation Auger Drilling Teeth B47k19h – LYNE Detail:

Replaceable Cutter Bit is one kind of Pre-cutting Bit. It can be installed in the Disc Cutter Holder to replace Disc Cutter in smaller-diameter gravel or intensely weathered rocks conditions. Replaceable Cutter Bit and Disc Cutter are spaced or alternated with each other in complex ground, so that Cutter Head can keep best composition during tunneling.

Cutter Holder is the connection of cutter and Cutter Head, which facilitates the cutter replacement.

Central Cutter Bit is used to cut the central soil of excavation face. The role of Central Cutter Bit is to center the excavation face and loosen the soil.( The characteristics of Central Cutter Bit are: 1. The body of Central Cutter bit is higher than other cutters, which ensures it first to cut soil. 2. Fishtail Cutter is tapered, so the soil cut by Central Cutter bit not only move along tangent direction and radial direction, but also rotate.) Central Cutter Bit can cut the central section soil and improve the fluidity of soil, so it can greatly increase Shield Machine tunneling efficiency.

Ordinary Cutter Bit is soft ground tool, it generally used for loose strata conditions like silt, fine silt, clay, medium sand, coarse-grained sand and gravelly sand layers. Cutter Bits are installed on the opening slots of Cutter Head and used for excavating most of the sections. While Shield Machine is moving forward, the Cutter Bit is rotating with Cutter Head. The rotation movement drives cutter edge and tool bit into soil and form axial shearing force( tunnel forward direction) and radial shearing force(tangential direction of Cutter Wheel) to do the excavation.

Heavy-duty Cutter Bit is mainly used in hard rock stratum or complex strata containing sandy gravel with big diameter, gravel and sandy clay. Its role is to remove the muck to protect Roller Disc Cutter and Pre-cutting Bit body.

Scraper Bit is one kind of Cutter Bits which is installed on the extreme edge of Cutter Head. It is used to cut the soft soil around the Cutter Head to keep the same excavation diameter. It is also to remove the stone slag crushed by Disc Cutter and Pre-cutting Bit in the hard rock stratum and complex strata .

	foundation auger drilling teeth B47K19H
	Product Type	B47K22H,B47K19H,B47K17H
	Applications	piling machine
	Category	Foundation Drilling

Product detail pictures:

Related Product Guide:

We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for China Wholesale 2 Rings Disc Cutter Suppliers – Foundation Auger Drilling Teeth B47k19h – LYNE , The product will supply to all over the world, such as: Florida, Rio de Janeiro, Vietnam, We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.

17 Inch Disc Cutter